Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13694445
- Product Categories
- TD-DSL cement self-leveling..
- TD-DFH1 high strength and w..
- TD-DFH2 high strength and w..
- TD-F1 interface agent
- TD-F2 liquid interface agent
- BRS acrylic emulsion (acryl..
- JS flexible composite water..
- K11 waterproof slurry
- TD-DAS cementitious capilla..
- Friendly Links
Information Name: | Extension of concrete sealer (water-based) |
Published: | 2015-04-25 |
Validity: | 30 |
Specifications: | |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | I. Introduction concrete sealer (water) is independently developed by our company, designed to solve with Portland cement and the development of various types of floor hardener from ash, sand, and other issues of insufficient strength. This is a unique formula with an aqueous liquid inorganic composite material, which can effectively penetrate the interior surface of the cement base 3-10mm, and a series of complex chemical reactions to form a three-dimensional network of dense overall to dramatically improve cement surface layer of the base surface strength, hardness and wear resistance, can not afford to completely sand, can not afford the effect of ash, large vehicles can withstand frequent travel and long-lasting effect. Second, the product features a hardened, dust, wear: After the completion of hardness that has improved significantly, and can be put into immediate use, highly wear-resistant, can not afford a permanent sand, dust can not afford. Good ground for the received light, will appear after a certain gloss frequently used, and the use of the longer, the better. 2, moisture permeability: permeability and chemical reaction by product, clogged pores inside the concrete to prevent underground moisture up, maintain indoor dry; avoid oils and other contaminants from the surface penetration, making it easy to clean the floor. 3. Other performance improvements: to enhance the compressive strength, impact resistance of concrete; concrete with epoxy or polyurethane elevate floor paint binding force, avoid drum kits, delamination; promotion of concrete anti-chemical corrosion; slowed down significantly weathered concrete. 4, the construction is simple, low cost, safety and environmental protection. Third, the use of: 1, severe osteoporosis C10 concrete floor above grade 2, for the surface layer due to insufficient strength caused from ash, dust and sand from the ground sclerosis treatment, such as: 1), from the ash, sand concrete ground (road) side, cement mortar floor 2), from the gray terrazzo floor 3), from the ashes of emery ground 4), from the self-leveling floor four gray cement, construction Step 1, the pre-construction preparation: The main tools: a bucket or watering can , bailer, broom, mop, latex gloves. Base surface pretreatment requirements and ensure that the ground is completely dry, sand and dust sweeping the ground, remove the paint, coatings and other attachments. Heavy oil ground, this product does not apply. 2. Construction: The construction period of about two days, a significant hardening effect the next day after the completion of Group B, and after completion there will be improved significantly within a week. 1, Part A (first day) ① spray Group A: Part A by liquid: water = 1: 3-5 (volume ratio) dilution, stir evenly sprayed with a broom sweeps back and forth in order to facilitate penetration. Note that the surface should be promptly drying up spilled Group A, to ensure that the ground has remained moist state ≥1 hour. Group A liquid dosage 0.3-0.6kg / m2. ② surface cleaning: spray enough water, first with the broom scrub back and forth, and then try to clear out the water surface. Necessary, repeat the cleaning, to ensure that the surface clean, no mud residue. Note: Since the surface of the sand is not particularly serious, or do not need a car's interior can only be cured by Part A sealed. 2, Part B (the next day) Note: After the ground was dry until completely white B before construction. Note: B may not diluted with water, sand serious regional (generally penetrate quickly) should increase the amount of material. ① spray B: B Shake before use, spray evenly, and with a broom sweeps back and forth in order to facilitate penetration. Liquid dosage 0.5-0.8kg / m2. ② kept moist: keep the surface moist ≥2 hours after spraying B finished. Moisture: Surface promptly when no clear water spray a small amount of water, and with a broom sweeps back and forth to make penetration more thorough hardening reaction. ③ surface cleaning: spray enough water, first with the broom scrub back and forth, and then try to clear out the water surface. Repeat 2-3 times cleaning is recommended. V. Notes ① If no construction other ground surface, the latter may not wash B construction does not affect the hardening effect, but after drying surface whitening phenomenon occurs. If the ground after hardening also need other decorative surfacing construction, such as floor paint, self-leveling cement mortar or PVC plastic and wood, etc., you need to clean the floor several times to ensure the decorative surfacing good bond with the primary ground force. ② B slightly corrosive, please do the protection, in particular the protection of steel material equipment, if contact with skin, please rinse with water. Six outdoor construction environment must choose the ground may not have obvious rain no rain during construction, construction, 2 ℃ |
Admin>>>
You are the 5865 visitor
Copyright © GuangDong ICP No. 10089450, Hainan Italy Extension of New Materials Co., Ltd All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5865 visitor
Copyright © GuangDong ICP No. 10089450, Hainan Italy Extension of New Materials Co., Ltd All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility